Dear customer, 😊

Are you facing the challenge of replacing your coil or drawstring?

Then you've come to the right place!

Unfortunately, the coil you have purchased/received may not fit your rowing machine from the factory, as we have replaced them over time and they are now designed slightly differently.

In most cases, however, it is not a problem to use a coil from a newer version in a rowing machine from an older version!

As the two versions only differ in the size of the pulley, the new coil can normally simply be pulled onto the old pulley.

To be able to use your new coil in an older version rowing machine, there are now two possible options for you:

Option 1 --> You mount the pulley from your old coil onto the new one.

• As the size of the pulley and therefore the drive belt have changed, the old drive belt is too short for the new coil.
• However, if you now replace the pulley of the two spools, the drive belt can be tensioned over the pulley again without any problems.

IMPORTANT: You will need circlip pliers to replace the pulley.

Option 2 --> You purchase a new drive belt from our online store.

The second option you have is to purchase a larger drive belt. This will also allow you to install your new coil without any problems. No circlip pliers are required for this solution.

You can purchase the right drive belt here:
Click here for the drive belt V2

To make it easier for you to change the reel, we have created an assembly video.

Simply follow the steps in the video and you will quickly get your rowing machine up and running again.

We hope that we have been able to help you with this information.

If you have any further questions or need support, please feel free to contact our Customer Happiness Team.

You can submit a request here:

Submit a request now

We wish you lots of fun with your SportPlus product!

 
Sporty greetings,

Your Customer Happiness Team